Episode 4: Packrats Love Acorns

My new P-100 respirator is from Northern Safety, the GVS Elipse. I bought it in January so of course they're out of stock now. This mask has a check valve to let exhaled air out easily which makes it utterly useless for a pandemic situation. It's strictly for working alone in sketchy circumstances. 

The first thing I did when I got my mask was to remove the elastic straps. Then I  took out the filters and washed the silicone part with dish soap. I replaced the straps with some spandex lingerie elastic from my stash. I went through a whole process trying to find elastic that isn't toxic. The stuff they use in bras and fold-over elastic is fine. Anything else starts out stinky and just gets more toxic to me as it ages.

Kimsul Insulation Brochure

Original faucet with very close spacing on water lines

https://www.vintagecampers.com/1948-spartan-30-mansion-355t/

This is the back of the kitchen sink showing where the original faucet was mounted and the new holes for the T&S Brass faucet

Plumbing under the kitchen sink. Not original

I don't know how the power and water came into these things originally. I hope to find out as I get farther along with gutting it. Maybe something will be revealed when I take the belly pan off and get a look underneath. The gas line went from the trailer hitch to the stove and somehow the water had to come in and wastewater had to go out. I'm guessing there were hookups directly below the bathroom.

While it's not that hard and kind of fun to take down the paneling and take out the cabinets I have put it off because I don't want to just pile them in my shed again. I need some sort of organization or plan for how I'm going to store them and to what purpose. 

On the request of my brother I added scientific ID to my nature clips and a little bit of True Facts in this episodes. I hope I didn't say anything inaccurate. Here's some citations.

https://animaldiversity.org/accounts/Neotoma_floridana/

https://www.fs.usda.gov/Internet/FSE_DOCUMENTS/fsm91_054316.pdf

All photos and videos in this episode were taken by me with the exception of the Kimsul adverts and the faucet photo from VintageCampers.com. 

I'm adding the subtitles file to the end of every blog entry for quickly finding things later, should that ever turn out to be a thing.

1

01:00:03,934 --> 01:00:07,400

Hi, my name is Barbara and I'm a blank builder and a blogger

  

2

01:00:07,400 --> 01:00:11,233

I'm on a mission to rebuild and repurpose this 71 year old 

3

01:00:11,233 --> 01:00:14,233

aircraft construction aluminum trailer home, Ally Mo

4

01:00:22,567 --> 01:00:27,266

So to get the back door open all I had to do was turn the 

knob. And pull

5

01:00:28,867 --> 01:00:30,900

Oh, I don't like that noise

6

01:00:39,667 --> 01:00:43,700

I think part of my problem here is the hinge pin is out of 

this part

7

01:00:44,033 --> 01:00:47,033

But the hinge pin is sticking out

8

01:01:02,300 --> 01:01:05,300

I got a new respirator

9

01:01:07,767 --> 01:01:10,767

I really like it

10

01:05:43,400 --> 01:05:50,333

What's in this stove is rock wool insulation, acorns, and 

whatever else the packrat wanted in its house

11

01:05:54,133 --> 01:06:00,500

I took that photo of a packrat in 2005 when I was tearing 

down the burned out well house

12

01:06:00,500 --> 01:06:04,934

While evidence of them is blatant they are actually pretty 

good at staying out of sight

13

01:06:04,934 --> 01:06:13,033

In addition to building these massive dens where they hoard 

acorns, another packrat  habit that reveals their presence 

is a latrine

14

01:06:13,033 --> 01:06:18,800

Unlike mice that just leave a trail of droppings wherever 

they go, packrats go in the same in place every time.  

15

01:06:18,800 --> 01:06:21,567

Notably, in the northeast corner of my shed

16

01:06:22,233 --> 01:06:28,567

I found a paper that confirms that packrats'  favorite food 

is acorns. They stock up when they're in season and ration 

them through spring and summer

17

01:06:29,266 --> 01:06:37,600

Rats in the genus Neotoma only have 4 nipples and have 1 to 

4 babies at a time. Here where winter is mild they breed 

year round

18

01:06:37,700 --> 01:06:45,033

True rats in the genus Rattus have 12 nipples and have huge 

litters of babies in spring and summer

19

01:06:45,033 --> 01:06:48,300

Packrats pick up treasure and take it home

20

01:06:48,300 --> 01:06:55,767

Whenever I rearrange my scrap lumber pile in the shed I wind

 up saying, "That's where that went!" 

21

01:06:55,767 --> 01:07:04,333

I've found a shed snake skin, a Scotchbrite pad, my work 

gloves, a hacksaw blade, and pencils in packrat nests.

22

01:07:05,133 --> 01:07:11,967

That's why I'm careful what I leave out in the shed now. 

Cause they will take your tools. They don't give a rat's 

ass.

23

01:15:42,934 --> 01:15:50,166

I'm not sure if this faucet is original or not. T&S Brass 

was a brand new company in 1949

24

01:15:50,166 --> 01:15:55,133

You can see this faucet in the T&S Brass catalog page from 

1950

25

01:15:55,133 --> 01:16:00,100

Unfortunately the chrome on the handles is flaking off

26

01:16:00,100 --> 01:16:04,967

You can get replacement handles from Home Depot but they 

changed the font. It's just not the same.

27

01:16:04,967 --> 01:16:13,066

I wonder if this is the original formica? This pattern is a 

cure for insomnia. I bet it was called Tan Linen.

28

01:16:13,066 --> 01:16:18,967

It's well worn out by the sink though. They were stuck in 

the '50s without a cutting board I guess. 

29

01:16:18,967 --> 01:16:22,633

The kitchen window still slides open and the screen is 

intact

30

01:16:22,633 --> 01:16:28,867

But the glass has a couple of bullet holes. The screen 

must've been replaced after the window was shot.

31

01:17:10,233 --> 01:17:14,533

I want to see if I can get this shelf out of here

32

01:17:17,533 --> 01:17:22,800

And I'm going to take the water heater out

33

01:17:23,567 --> 01:17:26,567

 I can't find my big crescent wrench

34

01:17:29,767 --> 01:17:32,767

I'm not sure which way to turn it

35

01:17:32,767 --> 01:17:35,767

That's tightening it, that's loosening it

36

01:17:44,433 --> 01:17:47,433

It's good plumbing in these things. It's all copper

37

01:17:51,567 --> 01:17:54,567

That was my finger!

38

01:20:24,467 --> 01:20:27,934

This right here is the wheel well

39

01:20:27,934 --> 01:20:32,133

And it has a layer of insulation on it here

40

01:20:34,066 --> 01:20:37,066

It's like some kind of foam

41

01:20:40,600 --> 01:20:43,834

It's weird stuff. I'm not sure what this is

42

01:20:45,867 --> 01:20:50,533

It's very stretchy. It's like crimped paper

43

01:20:50,533 --> 01:20:56,800

Is it some sort of corrugated.... It's weird, y'all

44

01:20:57,934 --> 01:21:03,266

After some research I found out this is Kimsul. Its creped 

paper insulation

45

01:21:03,266 --> 01:21:12,500

This brochure from 1939 is primarily to convince people to 

insulate AT ALL. But it does have specs, just like you'd 

expect? Ex-speced? Sorry

46

01:21:12,500 --> 01:21:18,367

Kimsul has a K factor of .27. It's above average

47

01:21:18,367 --> 01:21:25,333

That's an R value of 3.7 per inch, the same as the open cell

 spray foam insulation I used in my house and lab

48

01:21:25,333 --> 01:21:31,000

Kimsul was marketed specifically at trailers. I'll be 

interested to see where else I find it

49

01:21:31,000 --> 01:21:41,934

"Actually a home insulated with one inch of Kimsul is better

 protected against cold and heat than a castle with masonry 

walls several feet thick." 

50

01:21:41,934 --> 01:21:45,266

Sure, but how is it against a trebuchet?

51

01:21:45,266 --> 01:21:52,967

Comparing Memphis to Medicine Hat is impressive. 

Copyrighters in the '30s had a high opinion of their 

demographic

52

01:21:52,967 --> 01:22:02,967

Imagine assuming anybody knows where Medicine Hat is. It's 

in Alberta. That's Canada. The big cold place North of 

Montana

53

01:22:02,967 --> 01:22:07,300

Whereas Memphis, well, everybody knows that's the Capital of

 Finland

54

01:22:15,100 --> 01:22:23,900

OK, this copper pipe is gonna have to come out of there 

before I can remove this cabinet  

55

01:22:23,900 --> 01:22:29,800

I remember breaking it off when I was working on the wheel

56

01:22:31,500 --> 01:22:34,500

But I'm not sure how to get it out of there

57

01:22:36,166 --> 01:22:39,166

I might have to go at it from below

58

01:22:40,567 --> 01:22:46,967

So there's that copper pipe. I just pinched the end of that.

 I don't think I can push it up through that cabinet

59

01:22:47,400 --> 01:22:52,300

But the underside of these wheel wells looks pretty good, 

actually

60

01:22:52,300 --> 01:22:59,266

I'm kind of impressed. These are way nicer than Ally Min's 

wheel wells

61

01:22:59,266 --> 01:23:06,100

If I just patch the holes where the pipes go through I can 

use this 

62

01:23:06,100 --> 01:23:12,400

So now I'm completely inside the wheel well. This is an 

advantage of having one of the wheels out

63

01:23:17,066 --> 01:23:20,066

I forgot how strong copper pipe is

64

01:23:26,233 --> 01:23:29,233

OK

65

01:23:38,834 --> 01:23:41,834

Alright. Back in the wheel well

66

01:23:46,433 --> 01:23:49,433

>boink<

67

01:23:59,533 --> 01:24:07,934

It's kind of satisfying to get all these little pieces. I'll

 have to start a collection

68

01:24:08,333 --> 01:24:11,867

I might as well document my plumbing

69

01:24:11,867 --> 01:24:17,767

I do not know why that pipe went down through that hole. Was

 that the input?

70

01:24:19,233 --> 01:24:22,233

I don't know where it went from there 

71

01:24:22,233 --> 01:24:26,033

This was to the hot water. I don't know if that was in or 

out

72

01:24:26,033 --> 01:24:29,734

And this was out of this hot water

73

01:24:31,233 --> 01:24:35,266

Hot... Coulda been the inlet or the outlet

74

01:24:35,266 --> 01:24:38,266

Actually I'll go look at the water heater and then I'll know

 

75

01:24:39,233 --> 01:24:42,233

Alright, here's the water heater. This is the way it was in 

the cabinet. 

76

01:24:42,233 --> 01:24:46,800

So this one is cold and this one is hot

77

01:24:46,800 --> 01:24:51,000

So the left one is cold, the right one is hot

78

01:24:52,200 --> 01:24:55,200

Two and a half gallons. That's not much of a bath, is it? 

79

01:24:57,066 --> 01:25:03,433

OK, so here's cold. And this is hot

80

01:25:03,433 --> 01:25:11,100

So this is the hot pipe going to the bathroom

81

01:25:11,100 --> 01:25:18,133

And this is the cold water. I don't understand

82

01:25:18,133 --> 01:25:26,400

OK, this is cold going to the bathroom

83

01:25:26,400 --> 01:25:35,567

And this is the main cold. So this must be cold coming from 

the... Oh, hell, I don't know

84

01:25:37,133 --> 01:25:42,433

So this is hot to the kitchen sink. Right there

85

01:25:42,433 --> 01:25:45,433

What, that doesn't make sense

86

01:25:47,100 --> 01:25:50,100

This says H for hot

87

01:25:50,567 --> 01:25:58,800

So this, this, and this are all hot? This makes no sense.

88

01:25:58,800 --> 01:26:02,500

This has to be cold. The sink is just backwards

89

01:26:02,500 --> 01:26:06,734

They plumbed that sink wrong. I wonder if it was done wrong 

in the factory?

90

01:26:07,066 --> 01:26:10,767

Or was this all replumbed later? 

91

01:26:10,767 --> 01:26:17,066

That doesn't seem like something they would do in the 

factory. It seems like they would've figured that out

92

01:26:17,066 --> 01:26:22,900

And it makes me feel like this was an input, like this was 

where the water came in, through the wheel well.

93

01:26:22,900 --> 01:26:28,500

I don't know how. That's weird.

94

01:26:28,500 --> 01:26:33,467

I got a bright light and stuck the camera way back under the

 sink. Well, look at that!

95

01:26:33,467 --> 01:26:41,834

That T&S Brass faucet is definitely NOT original. What is 

that, 4" spacing like a bathroom faucet?

96

01:26:41,834 --> 01:26:47,500

I found a photo online of the original faucet. That would 

match that hole spacing

97

01:26:47,500 --> 01:26:52,367

And it is the weirdest kitchen faucet I have ever seen. 

98

01:26:52,367 --> 01:26:55,367

Look at it!

99

01:26:58,200 --> 01:27:02,200

So this was cold out of the water heater

100

01:27:02,200 --> 01:27:05,200

And this was hot

101

01:27:05,200 --> 01:27:13,200

So cold water came up through the wheel well and then it 

went into the water heater this way

102

01:27:13,200 --> 01:27:19,767

And then this line took cold to the sink in the bathroom. 

103

01:27:19,767 --> 01:27:25,166

I'm guessing this went all the way to the sink and the 

shower

104

01:27:25,166 --> 01:27:34,633

And this line goes to the toilet

105

01:27:37,133 --> 01:27:47,166

And then the hot side out of the water heater, here's the 

hot. And it went to the sink and shower in the bathroom

106

01:27:47,166 --> 01:27:52,400

And it also probably went to the faucet

107

01:27:52,400 --> 01:27:59,233

I think this used to be up here. And maybe when they put in 

the new water heater they just put these back wrong

108

01:27:59,233 --> 01:28:04,900

Because if you put this one up here then that would be the 

correct side of the kitchen sink

109

01:29:15,567 --> 01:29:22,467

I'm not sure what this is. I thought it was mouse pee but it

 doesn't want to come off

110

01:30:20,800 --> 01:30:26,033

And that's Episode 4 of the Beachton Buck Rivet Report. 

111

01:30:26,033 --> 01:30:29,033

Go buck yourself.

Episode 3: Ally, Move

In this episode I take off one of the wheels to measure it. I studied the Wheel Vintiques Fitment Guide to figure out what to measure.

A. RIM DIAMETER

This is the actual diameter of the wheel at the point where the tire bead seats (not the outer lip).

B. RIM WIDTH

Measure this from the inside of the outer lip at the bead seating point to the inner lip.

C. BACKSPACING

A very important measurement is from the inside of the wheel at the point where it contacts the hub, brake drum or axle flange to the outside edge (lip) of the wheel.

D. BOLT PATTERN

Count the number of mounting holes for the wheel and determine the diameter of a circle that would run through their center. 

etrailer.com has a good guide for the bolt spacing on 5 lug wheels.

Measuring the distance between the centers of adjacent holes, D

If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"

If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"

If D = 3", then the bolt pattern is 5 on 5"

If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

Notice none of the websites are particularly concerned about the hole in the middle. Well it's damned important! The hubs on this trailer require a 4" hole in the wheel, way bigger than average. 

The tire being on the wheel means I can't measure the rim width directly. But that and the rim diameter are stamped in the metal. 15x6. That'd be 15 inches by 6 inches.

These wheels have 7" tires on them. I almost couldn't get them in the wheel wells. I must be careful not to go any bigger than this.

I have seen some people doing vintage Airstream rebuilds and they put giant aggressive wheels and nobby tires on them. This is absolutely not the way I'm going with Ally Mo. The wheels are meant to blend in with the whole aesthetic. I am not going for a silk slip and combat boots here. 

After I took the wheel off and measured it I put it back on and got ready to move Ally Mo out of the way. My father gave me his old drill press for my art wood project and I need to run power to the shed for it. I've been putting off running power to the shed ever since I moved back here and started fixing this place up. You'll see why. It's not just the expense of copper wire and subpanels, it's the effort of digging in the conduit. It's going to be a bitch. I don't want overhead wires. I'd rather keep running an extension cord to the pole.

I got some help on moving the trailer from Otis Forbes. He used to work for my father's construction company. He helps me with things that are beyond my expertise and ability. When my house foundation failed Otis came with a concrete mixer and his expertise in pouring foundations and helped me fix it. And when I needed to thin some trees he came with a chainsaw and took care of it. Anyway, Otis went by my dad's shop and picked up the drill press and brought it to me. Then we moved the trailer. While he was here I had him get out his chain saw and cut a slice off a light'rd log to see if it would make a good cake plate. It wasn't as fat as I thought so I abandoned that project immediately. But I'm glad to know now.

While we were jacking up the trailer to take out the blocks my brother put under it one of the stacks tipped over and dropped Ally Mo on its noggin. The stack of blocks was turned so the long direction was front to back, like the blocks under Ally Min. This is the wrong direction for stability when jacking up either side. When I put blocks under it in the new location I turned them the other way.

Going forward it seems like I need a three point system for safety. A tongue jack and all four wheels on the ground would be a good start. I may make a little ramp to lift the low side and then put jack stands under.

As a sidebar to this video I have another one where I fix the impact driver that failed to drive a sheet metal screw into an old pine stud.

Here's the subtitles for this episode:

1

01:00:04,900 --> 01:00:11,166

Hi, my name is Barbara. I'm a blank builder and a blogger 

and I'm on a mission to rebuild and repurpose

2

01:00:11,166 --> 01:00:14,166

This 71 year old aircraft construction aluminum trailer home

Ally Mo

3

01:00:25,300 --> 01:00:29,867

I'm gonna have to take this thing off to see if I have the 

right backspacing

4

01:00:29,867 --> 01:00:38,000

It looks like I've got on here a 3/4" socket

5

01:00:38,633 --> 01:00:42,700

It seems to be the right size. But what am I going to do 

about this?

6

01:00:44,867 --> 01:00:47,867

Let's chock it 

7

01:00:49,734 --> 01:00:57,233

It is reassuring that this spins well

8

01:00:58,166 --> 01:01:05,600

That's good enough for around the yard. I think it would 

probably get hot on the highway

9

01:01:14,767 --> 01:01:20,166

I can't find my WD-40, but I found this Liquid Wrench 

without a nozzle

10

01:01:20,166 --> 01:01:26,200

And this spray can aid, so I'm going to see if I can make 

this squirt

11

01:01:27,200 --> 01:01:30,567

Oh, yeah. This is very efficient

12

01:01:36,133 --> 01:01:39,133

The solvent goes where the solvent's needed!

13

01:02:07,033 --> 01:02:10,033

Straight edge across

14

01:02:10,033 --> 01:02:13,033

And measure from here

15

01:02:16,500 --> 01:02:23,700

To the straight part. 3 5/8" is what it says 

16

01:02:24,233 --> 01:02:26,700

Alright, so 3 5/8" backspace?

17

01:02:26,700 --> 01:02:29,700

Doublecheck with a different ruler

18

01:02:31,200 --> 01:02:34,533

Still looks like about 3 5/8"

19

01:02:36,066 --> 01:02:39,066

Yep, 3 5/8" with all the different measurements

20

01:02:40,633 --> 01:02:43,633

I'm not sure if I want to put this wheel back on right now 

21

01:02:43,633 --> 01:02:47,600

because it smells of  Liquid Wrench

22

01:02:47,600 --> 01:02:52,633

So I'm just going to put these bolts back in the holes

23

01:02:55,900 --> 01:02:58,900

For safe keeping

24

01:03:00,633 --> 01:03:05,600

Now I can collect all the measurements I need to find a new 

wheel

25

01:03:05,600 --> 01:03:10,400

This hole in the middle of the wheel is extra large. 4 whole

inches

26

01:03:10,400 --> 01:03:17,467

Only a few Jeeps and trucks have hubs this big anymore, so I

think this feature is going to be the hardest to match

27

01:03:17,467 --> 01:03:21,567

Next I need to know the diameter of the circle through all 

the bolt holes

28

01:03:21,567 --> 01:03:29,900

Labeled here D, for diameter. I'm going to figure it out by 

measuring x, the distance between adjacent holes

29

01:03:29,900 --> 01:03:34,400

I'm not going to do geometry here, I'm going to look this up

online 

30

01:03:34,400 --> 01:03:39,834

3 1/4" between the center of the holes means it's a 5 1/2" 

circle

31

01:03:39,834 --> 01:03:45,100

This measurement is the backspace. It's 3 5/8" 

32

01:03:45,100 --> 01:03:54,800

15 x 6 is the rim diameter and width, in inches. Now I'm 

prepared for online shopping

33

01:04:04,734 --> 01:04:08,533

I want to run power from this 200 Amp panel to my shed

34

01:04:08,533 --> 01:04:11,533

This means digging a trench and running conduit

35

01:04:11,533 --> 01:04:13,400

Ally Mo is in the way

36

01:04:14,467 --> 01:04:19,934

My father got a new drill press and he's gonna let me have 

his old one. But he wouldn't let me take it in my car 

37

01:04:20,066 --> 01:04:24,400

He said to get a man with a trailer. That sounds like a job 

for Otis Forbes. 

38

01:04:24,400 --> 01:04:27,000

So I called Otis and asked him to get the drill press for me

39

01:04:27,000 --> 01:04:30,000

and then help me move Ally Mo while he's here. 

40

01:04:30,000 --> 01:04:34,433

When the coast is clear I can run my power. And I should 

start repainting the shed

41

01:04:34,433 --> 01:04:38,233

This is the last time I'm moving this with three wheels

42

01:09:02,767 --> 01:09:09,300

Something made a noise up here when I let that down

43

01:09:09,300 --> 01:09:13,667

Oh, shit! I lifted it off of this stack. That's not really 

what I meant to do

44

01:09:13,667 --> 01:09:19,433

So what happened? Well, that's off too.

45

01:09:19,500 --> 01:09:22,500

I don't know what I did

46

01:09:22,500 --> 01:09:26,333

Alright, I'm not sure what's gonna happen. I gotta jack up 

this other corner 

47

01:09:26,333 --> 01:09:31,967

and it's gonna go back down on that other side

48

01:09:52,233 --> 01:09:55,233

Looks pretty level

49

01:09:55,233 --> 01:10:01,266

Maybe a little low on the left side

50

01:10:04,300 --> 01:10:06,300

It's the new spot for now

51

01:10:06,300 --> 01:10:11,467

I got the weight off of the wheels. Tires, really.

52

01:10:11,467 --> 01:10:16,800

Because these old worn out tires I don't trust em with 

weight on em

53

01:10:16,800 --> 01:10:19,133

They will go flat

54

01:10:19,133 --> 01:10:22,133

Better to have them go flat without weight on them

55

01:10:22,133 --> 01:10:26,700

I'll still have to jack it up to get them off and to get new

tires on

56

01:10:26,700 --> 01:10:30,867

But I think it's ok for today!

57

01:10:40,867 --> 01:10:46,667

I'm excited to get this thing cleaned up. Gonna look so good

58

01:10:48,433 --> 01:10:52,333

Oh, let's check what happened where I dropped the trailer on

the 

59

01:10:53,133 --> 01:10:57,033

What do you call the skirt? The skirt?

60

01:10:57,500 --> 01:11:02,133

I dropped it on the skirt because of this wheel missing

61

01:11:02,200 --> 01:11:05,166

The Notorious Missing Wheel

62

01:11:05,166 --> 01:11:10,000

It makes it completely unbalanced

63

01:11:10,000 --> 01:11:15,233

And this front corner took a dive

64

01:11:15,233 --> 01:11:20,667

And sat right down on this aluminum and squushed it.

65

01:11:20,667 --> 01:11:23,934

So that's never gonna be the same again

66

01:11:23,934 --> 01:11:31,000

But you know, it's pretty strong. It just goes to show you 

just how thick this is

67

01:11:31,133 --> 01:11:35,467

Heavy gauge aluminum, it just sort of mushed

68

01:11:35,467 --> 01:11:38,467

I could, I dunno

69

01:11:38,767 --> 01:11:44,567

On the other one when I took the tongue off I had to patch 

in all this

70

01:11:44,567 --> 01:11:47,533

So it's possible to patch this in

71

01:11:47,533 --> 01:11:52,533

Or take it off. I could take that part off and redo the 

whole front

72

01:11:52,533 --> 01:11:57,800

Make the whole apron go around the tongue and everything. 

That might be interesting 

73

01:14:22,700 --> 01:14:29,033

This shed used to have power coming in through this 

weatherhead. The wiring into the panel was copper 

74

01:14:29,033 --> 01:14:34,200

and then aluminum wire went through the air and into a power

distribution panel in the well house 

75

01:14:34,200 --> 01:14:40,700

I can't explain these taped up lumps. I cut this down 15 

years ago but saved it as an artifact

76

01:14:40,700 --> 01:14:45,600

In the 20 years this place was abandoned prescribed fire 

destroyed the well house  

77

01:14:45,600 --> 01:14:48,600

and burned up this corner of the shed

78

01:14:48,600 --> 01:14:55,600

I sistered in new wood against the burned up stuff,  

replaced what was totally gone and screwed the metal to it 

again

79

01:14:55,600 --> 01:14:58,700

That's how I ended up with this triple stud situation

80

01:14:58,700 --> 01:15:03,700

I think I can screw a subpanel on there and bring conduit up

 through the corrugation in the wall

81

01:15:03,700 --> 01:15:05,867

I prefer buried utilities

82

01:15:08,467 --> 01:15:11,467

It's not real flat

83

01:15:11,467 --> 01:15:14,033

But the box does fit pretty good

84

01:15:14,033 --> 01:15:17,033

I like that there's three mounting holes, one for each stud

85

01:15:17,033 --> 01:15:20,033

I'll just make it flatter

86

01:15:56,500 --> 01:15:59,500

That's better

87

01:18:47,500 --> 01:18:57,567

Building code says electrical conduit has to be 18" deep, so

I got some more digging to do

88

01:20:47,000 --> 01:20:54,266

Now this is a bit higher than it needs to be, but I'm going 

to cut end off

89

01:20:55,867 --> 01:20:58,867

That's gonna be great. Awesome 

90

01:21:01,967 --> 01:21:04,967

So this'll get a fitting like that

91

01:21:06,066 --> 01:21:09,633

Then that goes on like that and then you screw it to the 

wall

92

01:21:09,633 --> 01:21:13,967

And then you put the nut on it, it's gonna be awesome

93

01:21:23,233 --> 01:21:27,500

If you're looking at this 50 feet of conduit thinking, 

"Barbara

94

01:21:27,500 --> 01:21:29,834

That's a lot of digging!

95

01:21:29,834 --> 01:21:35,100

Especially since it goes past these two giant longleaf 

pines.

96

01:21:35,100 --> 01:21:39,700

Think of the roots, Barbara! Think of the roots you're gonna

have to dig through!"

97

01:21:40,033 --> 01:21:43,033

Yeah, I'm thinking about it! I'm thinkin' about it!

98

01:21:45,367 --> 01:21:47,533

I'm thinking about it

99

01:21:47,533 --> 01:21:52,066

I'm just gonna dig a little bit until I get too tired and 

then I'll dig some more the next day

100

01:25:24,066 --> 01:25:27,066

That's all I can do in one day

101

01:25:31,100 --> 01:25:33,834

It's hard, y'all

102

01:25:33,834 --> 01:25:36,834

It's hard to dig. It hurts my back

103

01:25:39,166 --> 01:25:41,300

That's all for today go buck yourself